M-Tac Riflescope - 1-4x24mm, Illuminated Reticle, Fastfire III Red Dot with 3 MOA Dot-PEPR Mount
Manufacture ID: 200467
Just when you thought it couldn't get any better than the TAC30, Burris brings added innovation with the Burris MTAC rifle scope. The MTAC is designed to stand up to the hard use of tactical shooters. This scope features a superior light gathering glass than the TAC30. These high quality lenses with hi-lume multi-coatings provide a crisp, clear picture from dusk to dawn. Another major improvement in the MTAC is the independently moving power ring, separate from the ocular bell. This improvement lets the shooter adjust the power range without any visual interruption. Double-spring tension and an oversized ball-joint secure the hand-fitted internal zoom-assembly. The main tube is constructed of aircraft grade 6061t6 aluminum. Each scope is purged with laboratory-grade nitrogen to eliminate internal moisture and sealed with Burris-exclusive quad seals. The adjustment system is positive and repeatable with audible clicks ensuring unfailing shot-to-shot accuracy in all environments. Another key feature is the available Ballistic AR reticle which allows for rapid engagement of close quarters targets while also providing holdover points out to 600 yards when shooting a 62 grain 5.56x45mm load.
Fast Fire III:
The The next generation of FastFire Red-Dot is here with the introduction of the FastFire III. The popular FastFire II is even better with upgraded features that include a top mounted battery for easier battery replacement, upgraded windage and elevation adjustments and a power button that provides three manual brightness settings and an automatic brightness setting with low battery indicator. The precision FastFire III allows for manual brightness adjustment and includes a protective cover and battery. Just like the rugged FastFire II, the FastFire III features a Steel body construction for extreme durability and is 100% waterproof.
Specifications:
- Magnification: 1-4x
- Objective Diameter: 24mm
- Reticle: Illuminated Ballistic AR
- Reticle Construction: Glass Etched
- Battery Type: CR2032
- Holdover Reticle: Yes
- Reticle Focal Plane Location: 2nd
- Parallax Adjustment: Fixed
- Tube Diameter: 30mm
- Power Variability: Variable
- Adjustment Click Value: 1/2 MOA
- Adjustment Type: Click
- Lens Coating: Fully Multi-Coated
- Eye Relief: 1x: 3.50" and 4x: 4"
- Exit Pupil Diameter: 1x: 24mm and 4x: 6mm
- Field of View at 100 Yards: 1x: 100' and 4x: 32'
- Maximum Windage and Elevation Adjustment: 130 MOA
- Exposed Turrets: No
- Finger Adjustable Turrets: Yes
- Turrets Resettable to Zero: No
- Zero Stop: No
- Turret Height: Medium
- Fast Focus Eye Piece: Yes
- Rings Included: Yes
- Sun Shade Included: No
- Lens Covers Included: No
- Waterproof, Fogproof, and Shockproof: Yes
- Length: 11.30"
- Weight: 17 oz
- Finish: Sand
Note: The rotary illumination switch is located on the left side of the adjustment turret and features 10 brightness settings in which every setting is protected from any unwanted changes by a solid detent. When you need to eliminate illumination immediately, there is an off position located between each setting
Just when you thought it couldn't get any better than the TAC30, Burris brings added innovation with the Burris MTAC rifle scope. The MTAC is designed to stand up to the hard use of tactical shooters. This scope features a superior light gathering glass than the TAC30. These high quality lenses with hi-lume multi-coatings provide a crisp, clear picture from dusk to dawn. Another major improvement in the MTAC is the independently moving power ring, separate from the ocular bell. This improvement lets the shooter adjust the power range without any visual interruption. Double-spring tension and an oversized ball-joint secure the hand-fitted internal zoom-assembly. The main tube is constructed of aircraft grade 6061t6 aluminum. Each scope is purged with laboratory-grade nitrogen to eliminate internal moisture and sealed with Burris-exclusive quad seals. The adjustment system is positive and repeatable with audible clicks ensuring unfailing shot-to-shot accuracy in all environments. Another key feature is the available Ballistic AR reticle which allows for rapid engagement of close quarters targets while also providing holdover points out to 600 yards when shooting a 62 grain 5.56x45mm load.
Fast Fire III:
The The next generation of FastFire Red-Dot is here with the introduction of the FastFire III. The popular FastFire II is even better with upgraded features that include a top mounted battery for easier battery replacement, upgraded windage and elevation adjustments and a power button that provides three manual brightness settings and an automatic brightness setting with low battery indicator. The precision FastFire III allows for manual brightness adjustment and includes a protective cover and battery. Just like the rugged FastFire II, the FastFire III features a Steel body construction for extreme durability and is 100% waterproof.
Specifications:
- Magnification: 1-4x
- Objective Diameter: 24mm
- Reticle: Illuminated Ballistic AR
- Reticle Construction: Glass Etched
- Battery Type: CR2032
- Holdover Reticle: Yes
- Reticle Focal Plane Location: 2nd
- Parallax Adjustment: Fixed
- Tube Diameter: 30mm
- Power Variability: Variable
- Adjustment Click Value: 1/2 MOA
- Adjustment Type: Click
- Lens Coating: Fully Multi-Coated
- Eye Relief: 1x: 3.50" and 4x: 4"
- Exit Pupil Diameter: 1x: 24mm and 4x: 6mm
- Field of View at 100 Yards: 1x: 100' and 4x: 32'
- Maximum Windage and Elevation Adjustment: 130 MOA
- Exposed Turrets: No
- Finger Adjustable Turrets: Yes
- Turrets Resettable to Zero: No
- Zero Stop: No
- Turret Height: Medium
- Fast Focus Eye Piece: Yes
- Rings Included: Yes
- Sun Shade Included: No
- Lens Covers Included: No
- Waterproof, Fogproof, and Shockproof: Yes
- Length: 11.30"
- Weight: 17 oz
- Finish: Sand
Note: The rotary illumination switch is located on the left side of the adjustment turret and features 10 brightness settings in which every setting is protected from any unwanted changes by a solid detent. When you need to eliminate illumination immediately, there is an off position located between each setting
